Home » Alabama » Limestone County

Radon in Limestone County, AL: Test Results and Levels

Updated November 2026 · Data: CDC National Environmental Public Health Tracking Network (radon test results from laboratories, 2008–2017), EPA Map of Radon Zones · Sources and method

Radon testing laboratories reported 501 pre-mitigation radon tests from buildings in Limestone County, Alabama between 2008 and 2017, according to the CDC Tracking Network. 10.1% of those tests were at or above the EPA action level of 4 pCi/L, and the median result was 1.3 pCi/L. That is roughly 1 in 10 tested buildings. The county’s share of high results is lower than the Alabama figure of 21.3% and below the U.S. figure of 36.4%. Limestone County is in EPA Zone 1, yet only 10.1% of tests reached 4 pCi/L. A lower share of high results does not make an individual home safe.

10.1%of tests at or above 4 pCi/L
1.3 pCi/Lmedian test result
2.3 pCi/Laverage (mean) test result
501buildings tested, 2008–2017
87.0 pCi/Lhighest test result
#23 of 28Alabama counties by share of high tests
Zone 1EPA radon zone

These are area results, not your home’s level. Homes next to each other can have very different radon levels. The only way to know yours is to test.

Radon test results in Limestone County

Test resultLimestone CountyAlabamaUnited States
Below 2 pCi/L65.6%55.0%38.8%
2 to 4 pCi/L24.3%23.7%24.8%
4 pCi/L or higher10.1%21.3%36.4%
Share of pre-mitigation tests by level, 2008–2017. Source: CDC Tracking Network, Radon Tests from Labs.

About 66% of tests in Limestone County came back below 2 pCi/L, and 24.3% fell between 2 and 4 pCi/L, where the EPA suggests considering a fix. The average result (2.3 pCi/L) is well above the median (1.3 pCi/L) because a smaller number of very high readings pull the average up; the highest test reported was 87.0 pCi/L.

How Limestone County compares with other Alabama counties

CountyTests4 pCi/L or higherMedian (pCi/L)
Limestone County (this page)50110.1%1.3
Colbert County57836.2%2.7
Lauderdale County1,15127.2%2.2
Madison County2,95925.2%1.9
Calhoun County18118.9%1.4
Franklin County16218.1%1.4
Jackson County17817.5%1.5
Lawrence County12416.2%1.7
Marshall County15815.1%1.3
Counties with at least 100 tests, highest share of high results first. Source: CDC Tracking Network, 2008–2017.

All Alabama counties, the radon zone map and state contacts: Radon in Alabama.

How to test your home in Limestone County

Frequently asked questions

Is radon a problem in Limestone County?

10.1% of 501 pre-mitigation radon tests in Limestone County from 2008 to 2017 were at or above 4 pCi/L, according to CDC Tracking Network laboratory data. The county is in EPA radon Zone 1. Any home can have high radon, so testing is the only way to know.

What is the average radon level in Limestone County?

The median test result in Limestone County is 1.3 pCi/L and the mean is 2.3 pCi/L (CDC Tracking Network, 2008–2017). For comparison, the average indoor radon level in U.S. homes is about 1.3 pCi/L, according to the EPA.

How does Limestone County compare with the rest of Alabama?

Limestone County ranks 23 of 28 Alabama counties (with at least 20 tests) by the share of tests at or above 4 pCi/L. Statewide, 21.3% of 8,148 laboratory tests reached that level.

Should I test if my neighbor’s result was low?

Yes. Radon depends on the soil and rock under each building and on how the building is built, so two houses on the same street can have very different results.

Sources and method

The CDC National Environmental Public Health Tracking Network collects radon test results from radon testing laboratories and summarizes them by county over 10-year periods; the latest period available is 2008–2017. Numbers describe buildings that were tested (mostly homes tested by their owners), not a random sample of every home, and counties with few tests are less reliable. We only publish county pages where at least 100 buildings were tested. State and U.S. figures on this page are weighted by the number of tests in each county. Data retrieved in November 2026.