Home » Arizona » Pima County

Radon in Pima County, AZ: Test Results and Levels

Updated November 2026 · Data: CDC National Environmental Public Health Tracking Network (radon test results from laboratories, 2008–2017), EPA Map of Radon Zones · Sources and method

Radon testing laboratories reported 219 pre-mitigation radon tests from buildings in Pima County, Arizona between 2008 and 2017, according to the CDC Tracking Network. 6.8% of those tests were at or above the EPA action level of 4 pCi/L, and the median result was 1.1 pCi/L. The county’s share of high results is lower than the Arizona figure of 16.8% and below the U.S. figure of 36.4%. Pima County is in EPA radon Zone 2 (moderate potential, 2 to 4 pCi/L).

6.8%of tests at or above 4 pCi/L
1.1 pCi/Lmedian test result
1.6 pCi/Laverage (mean) test result
219buildings tested, 2008–2017
21.7 pCi/Lhighest test result
#6 of 7Arizona counties by share of high tests
Zone 2EPA radon zone

These are area results, not your home’s level. Homes next to each other can have very different radon levels. The only way to know yours is to test.

Radon test results in Pima County

Test resultPima CountyArizonaUnited States
Below 2 pCi/L78.3%59.9%38.8%
2 to 4 pCi/L14.9%23.3%24.8%
4 pCi/L or higher6.8%16.8%36.4%
Share of pre-mitigation tests by level, 2008–2017. Source: CDC Tracking Network, Radon Tests from Labs.

About 78% of tests in Pima County came back below 2 pCi/L, and 14.9% fell between 2 and 4 pCi/L, where the EPA suggests considering a fix. The average result (1.6 pCi/L) is well above the median (1.1 pCi/L) because a smaller number of very high readings pull the average up; the highest test reported was 21.7 pCi/L.

How Pima County compares with other Arizona counties

CountyTests4 pCi/L or higherMedian (pCi/L)
Pima County (this page)2196.8%1.1
Coconino County15330.0%2.3
Maricopa County1,51217.4%1.6
Yavapai County18716.2%1.6
Counties with at least 100 tests, highest share of high results first. Source: CDC Tracking Network, 2008–2017.

All Arizona counties, the radon zone map and state contacts: Radon in Arizona.

How to test your home in Pima County

Frequently asked questions

Is radon a problem in Pima County?

6.8% of 219 pre-mitigation radon tests in Pima County from 2008 to 2017 were at or above 4 pCi/L, according to CDC Tracking Network laboratory data. The county is in EPA radon Zone 2. Any home can have high radon, so testing is the only way to know.

What is the average radon level in Pima County?

The median test result in Pima County is 1.1 pCi/L and the mean is 1.6 pCi/L (CDC Tracking Network, 2008–2017). For comparison, the average indoor radon level in U.S. homes is about 1.3 pCi/L, according to the EPA.

How does Pima County compare with the rest of Arizona?

Pima County ranks 6 of 7 Arizona counties (with at least 20 tests) by the share of tests at or above 4 pCi/L. Statewide, 16.8% of 2,229 laboratory tests reached that level.

Should I test if my neighbor’s result was low?

Yes. Radon depends on the soil and rock under each building and on how the building is built, so two houses on the same street can have very different results.

Sources and method

The CDC National Environmental Public Health Tracking Network collects radon test results from radon testing laboratories and summarizes them by county over 10-year periods; the latest period available is 2008–2017. Numbers describe buildings that were tested (mostly homes tested by their owners), not a random sample of every home, and counties with few tests are less reliable. We only publish county pages where at least 100 buildings were tested. State and U.S. figures on this page are weighted by the number of tests in each county. Data retrieved in November 2026.