Home » Utah » Washington County

Radon in Washington County, UT: Test Results and Levels

Updated November 2026 · Data: CDC National Environmental Public Health Tracking Network (radon test results from laboratories, 2008–2017), state-reported results 2019–2023, EPA Map of Radon Zones · Sources and method

Radon testing laboratories reported 178 pre-mitigation radon tests from buildings in Washington County, Utah between 2008 and 2017, according to the CDC Tracking Network. 14.8% of those tests were at or above the EPA action level of 4 pCi/L, and the median result was 1.8 pCi/L. That is roughly 1 in 7 tested buildings. The county’s share of high results is lower than the Utah figure of 41.9% and below the U.S. figure of 36.4%. Washington County is in EPA radon Zone 2 (moderate potential, 2 to 4 pCi/L).

14.8%of tests at or above 4 pCi/L
1.8 pCi/Lmedian test result
2.3 pCi/Laverage (mean) test result
178buildings tested, 2008–2017
15.6 pCi/Lhighest test result
#19 of 19Utah counties by share of high tests
Zone 2EPA radon zone

These are area results, not your home’s level. Homes next to each other can have very different radon levels. The only way to know yours is to test.

Radon test results in Washington County

Test resultWashington CountyUtahUnited States
Below 2 pCi/L57.6%30.2%38.8%
2 to 4 pCi/L27.6%27.9%24.8%
4 pCi/L or higher14.8%41.9%36.4%
Share of pre-mitigation tests by level, 2008–2017. Source: CDC Tracking Network, Radon Tests from Labs.

About 58% of tests in Washington County came back below 2 pCi/L, and 27.6% fell between 2 and 4 pCi/L, where the EPA suggests considering a fix. The average result (2.3 pCi/L) is above the median (1.8 pCi/L) because a smaller number of very high readings pull the average up; the highest test reported was 15.6 pCi/L.

Recent results reported by Utah

YearBuildings testedMedian (pCi/L)4 pCi/L or higher
2019231.39.1%
2020651.313.6%
20211580.27.2%
20223181.49.4%
20236731.39.9%
Source: CDC Tracking Network, Radon Tests from States (state-reported annual data).

Utah also sends yearly radon test data to the CDC. These newer numbers come from a different collection than the 2008–2017 laboratory figures, so small differences between them are normal.

How Washington County compares with other Utah counties

CountyTests4 pCi/L or higherMedian (pCi/L)
Washington County (this page)17814.8%1.8
Box Elder County33864.3%5.8
Wasatch County37361.7%6.0
Cache County1,00256.8%4.7
Utah County4,62048.0%3.8
Tooele County37145.4%3.5
Salt Lake County10,44939.1%3.1
Weber County87036.2%2.6
Davis County2,10033.7%2.7
Counties with at least 100 tests, highest share of high results first. Source: CDC Tracking Network, 2008–2017.

All Utah counties, the radon zone map and state contacts: Radon in Utah.

How to test your home in Washington County

  • The Utah DEQ Radon Program can tell you about free or discounted test kits and certified professionals (phone: 801-536-0091; 1-800-458-0145).
  • Short-term test kits take 2 to 4 days. Put the kit in the lowest lived-in level of the home, with windows and doors closed. See how to test for radon.
  • If the result is 4 pCi/L or higher, the EPA recommends fixing the home; between 2 and 4 pCi/L, consider a fix. Read what radon level is safe.
  • A radon mitigation system usually lowers levels by 80% to 99%. Typical prices are in our radon mitigation cost guide.

Frequently asked questions

Is radon a problem in Washington County?

14.8% of 178 pre-mitigation radon tests in Washington County from 2008 to 2017 were at or above 4 pCi/L, according to CDC Tracking Network laboratory data. The county is in EPA radon Zone 2. Any home can have high radon, so testing is the only way to know.

What is the average radon level in Washington County?

The median test result in Washington County is 1.8 pCi/L and the mean is 2.3 pCi/L (CDC Tracking Network, 2008–2017). For comparison, the average indoor radon level in U.S. homes is about 1.3 pCi/L, according to the EPA.

How does Washington County compare with the rest of Utah?

Washington County ranks 19 of 19 Utah counties (with at least 20 tests) by the share of tests at or above 4 pCi/L. Statewide, 41.9% of 21,450 laboratory tests reached that level.

Should I test if my neighbor’s result was low?

Yes. Radon depends on the soil and rock under each building and on how the building is built, so two houses on the same street can have very different results.

Sources and method

The CDC National Environmental Public Health Tracking Network collects radon test results from radon testing laboratories and summarizes them by county over 10-year periods; the latest period available is 2008–2017. Numbers describe buildings that were tested (mostly homes tested by their owners), not a random sample of every home, and counties with few tests are less reliable. We only publish county pages where at least 100 buildings were tested. State and U.S. figures on this page are weighted by the number of tests in each county. Data retrieved in November 2026.