Home » Virginia » Augusta County

Radon in Augusta County, VA: Test Results and Levels

Updated November 2026 · Data: CDC National Environmental Public Health Tracking Network (radon test results from laboratories, 2008–2017), EPA Map of Radon Zones · Sources and method

Radon testing laboratories reported 450 pre-mitigation radon tests from buildings in Augusta County, Virginia between 2008 and 2017, according to the CDC Tracking Network. 50.1% of those tests were at or above the EPA action level of 4 pCi/L, and the median result was 4.0 pCi/L. More than half of the tested buildings reached the action level. The county’s share of high results is higher than the Virginia figure of 30.8% and above the U.S. figure of 36.4%. Augusta County is in EPA radon Zone 1 (highest potential, predicted average above 4 pCi/L).

50.1%of tests at or above 4 pCi/L
4.0 pCi/Lmedian test result
6.0 pCi/Laverage (mean) test result
450buildings tested, 2008–2017
105.8 pCi/Lhighest test result
#12 of 83Virginia counties by share of high tests
Zone 1EPA radon zone

These are area results, not your home’s level. Homes next to each other can have very different radon levels. The only way to know yours is to test.

Radon test results in Augusta County

Test resultAugusta CountyVirginiaUnited States
Below 2 pCi/L25.9%44.3%38.8%
2 to 4 pCi/L24.0%25.0%24.8%
4 pCi/L or higher50.1%30.8%36.4%
Share of pre-mitigation tests by level, 2008–2017. Source: CDC Tracking Network, Radon Tests from Labs.

About 26% of tests in Augusta County came back below 2 pCi/L, and 24.0% fell between 2 and 4 pCi/L, where the EPA suggests considering a fix. The average result (6.0 pCi/L) is well above the median (4.0 pCi/L) because a smaller number of very high readings pull the average up; the highest test reported was 105.8 pCi/L.

How Augusta County compares with other Virginia counties

CountyTests4 pCi/L or higherMedian (pCi/L)
Augusta County (this page)45050.1%4.0
Washington County26158.1%4.8
Giles County14056.9%4.8
Staunton City21252.7%4.2
Pulaski County17749.6%3.9
Waynesboro City13848.5%3.8
Clarke County30447.7%3.5
King George County47345.5%3.6
Winchester City66544.8%3.3
Counties with at least 100 tests, highest share of high results first. Source: CDC Tracking Network, 2008–2017.

All Virginia counties, the radon zone map and state contacts: Radon in Virginia.

How to test your home in Augusta County

Frequently asked questions

Is radon a problem in Augusta County?

50.1% of 450 pre-mitigation radon tests in Augusta County from 2008 to 2017 were at or above 4 pCi/L, according to CDC Tracking Network laboratory data. The county is in EPA radon Zone 1. Any home can have high radon, so testing is the only way to know.

What is the average radon level in Augusta County?

The median test result in Augusta County is 4.0 pCi/L and the mean is 6.0 pCi/L (CDC Tracking Network, 2008–2017). For comparison, the average indoor radon level in U.S. homes is about 1.3 pCi/L, according to the EPA.

How does Augusta County compare with the rest of Virginia?

Augusta County ranks 12 of 83 Virginia counties (with at least 20 tests) by the share of tests at or above 4 pCi/L. Statewide, 30.8% of 40,388 laboratory tests reached that level.

Should I test if my neighbor’s result was low?

Yes. Radon depends on the soil and rock under each building and on how the building is built, so two houses on the same street can have very different results.

Sources and method

The CDC National Environmental Public Health Tracking Network collects radon test results from radon testing laboratories and summarizes them by county over 10-year periods; the latest period available is 2008–2017. Numbers describe buildings that were tested (mostly homes tested by their owners), not a random sample of every home, and counties with few tests are less reliable. We only publish county pages where at least 100 buildings were tested. State and U.S. figures on this page are weighted by the number of tests in each county. Data retrieved in November 2026.